The supplied 10cm cables are crimped with ferrules that may be too large to insert into the WAGO terminals. I removed the plastic shell with side cutters, leaving only the metal ferrule on the wire. This allowed insertion into the WAGO terminal.
M2.5 x 8mm screws do not come with the Revo hotend option. You will need to supply M3x10mm screws to mount the Revo. Route the wiring from the hotend to side where the probe would mount.
This step ends with “insert two more M5x10 Ultra Low Head Screws” but doesn’t call out the initial insertion of M5 screws in a step above. There should be a total of four M5x10 Ultra Low Head Screws on this step.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
The supplied 10cm cables are crimped with ferrules that may be too large to insert into the WAGO terminals. I removed the plastic shell with side cutters, leaving only the metal ferrule on the wire. This allowed insertion into the WAGO terminal.
Ensure the magnets repel each other.
M2.5 x 8mm screws do not come with the Revo hotend option. You will need to supply M3x10mm screws to mount the Revo. Route the wiring from the hotend to side where the probe would mount.
It is necessary to remove the “belt lock” from the previous step to insert one of the M3x30 socket cap screws.
This step ends with “insert two more M5x10 Ultra Low Head Screws” but doesn’t call out the initial insertion of M5 screws in a step above. There should be a total of four M5x10 Ultra Low Head Screws on this step.